Use For Uneven Terrain
This model was originally designed as a solution for uneven terrain. In many applications that have uneven terrain, the user will want a unit that contours to the land. Each of the units have wheels to stabilize the unit for those uneven patches of ground.
When we say, "self-contained" we mean that the unit comes ready to go. While you will have to assemble the unit when you receive it, you do not need any additional pumps/tanks to get started. All you will need is the chemical of choice and an ATV or something to pull the unit!.
Great For Road Travel
Our Pull-Type units are designed for road side travel. Our 15 ft, 20 ft, 30 ft, and 40 ft. units all have the ability to fold up to travel safely down the road. Please watch our video below to see how our 30 ft unit folds up for road travel!
Complete Product Selection
Click Product To Read More>
*We do not sell direct to customers. Listed above are the products we offer at our recommended MSRP (not including freight and set-up costs). Please contact your local dealer with our easy to use, "Find a dealer" tab on our menu page. Click on the products above for a detailed description of each individual product that we offer.
How Does It Work?
Everything You Need To Know About Using This Model
Understanding The Feeding System
This pump fed system uses our manifold (# of ports will vary by the size of your boom) to feed your sponges. Each sponge will be individually fed from the manifold, therefore, there is no flow across the boom. The manifold system is powered by your pump, so when you switch off your pump, the manifold will cut off the flow to your sponges. The system will come with the tubing and plumbing needed to operate your system and it's important during the install to make sure all of your feed lines are cut evenly from the manifold to each sponge to ensure even distribution. See your instruction manual for more information.
See video above for installation instruction. For operation, start by mixing your preferred chemical solution to attack your resistant weeds. Since you are applying chemical directly onto the taller growing weeds, you can use a variety of chemicals at specific mix rates. For Round up, please follow the labels recommended 33% mix for weed wiper application. For Gramoxone, please use a 50% concentrate. For all other products, please follow the label or consult your field rep. Then, you will fill your tank with your mix over a safe area (Example: cement). Keep in mind that you will use significantly less chemical with a weed wiper. Once your tank is full, run a hose of fresh water over your sponges to get them saturated. After saturating the sponges, we recommend wringing out the sponges to get the excess water out of the system. This process helps ensure that the chemical will evenly distribute across each sponge when you begin to run your pump. Next, while over a safe area, turn on your pump for a few seconds to fill your sponges. The time needed to fill your sponges completely will vary because of size and pump models. However, your initial fill over safe ground will give you a better idea how long you will need to run your pump to fill your sponges. Run the system right up till the point where the sponges begin to drip. Once you have reached that point, simply turn off the solution and head into your field. During application, you can simply turn on your pump for a few seconds to re-fill your sponges on the go. Read the testimonies to hear about just how effective and easy to use our weed wipers are in the field. Give us a call if you have more questions.
What Chemical Should I Use?
Find out what thousands of satisfied customers are using
A lot of people ask us the question, what should I use in my sponge weed wiper? While we are drift free application experts, we are not chemical experts. However, we can share with you the latest trends on what thousands of customers are currently using in our weed wipers. Most chemicals can be used in our weed wipers, however, always check with your chemical expert to discuss the best chemical option for your drift free weed wiping application.
Most Popular Option
It's always best to follow the label for drift free weed wiping applications or consult your field rep. However, most chemicals can be used in our weed wipers. The most common product to use in a wiper is Glyphosate (Round-Up). The manufacturing label recommends a 33% mix rate, however, please follow your label for mix rates . Please note that a good surfactant like Sur-Tec (free sample provided with every weed wiper purchase) can enhance the performance of the chemical of choice. Each kit will come with a free 4 ounce sample of Sur-Tec Herbicide Enhancer/Surfactant. You can order this product online or purchase through your closest weed wiper dealer.
Going After Resistant Weeds?
There are now over 20 varieties of Round-up resistant weeds worldwide. If you have resistant weeds like marestail and pigweed... many of our current customers are using products like Gramoxone and 2-4-D. Gramoxone by Syngenta is labeled for use in cotton, beans and peanuts in most states at a 50% rate. Please use caution when using this chemical and contact your local field rep for specific questions about chemical use. However, many customers are currently using this product to fight off the resistant weeds.
Environmentally Friendly Option
If you are an organic grower and/or need a, "non-chemical" weed control product, there is Natural Vinegar (20%) acidity available to use in our sponge wipers and our handheld applicators. Weed wipers are a great way to be environmentally conscious and avoid potentially harmful chemicals.
*It’s important to remember that the ratio of herbicide to water can vary depending on the weeds to be controlled, the time of year, and the temperature. Contact your chemical field rep or extension service for best herbicide mix and or surfactant for specific weed and crop conditions.